Products
-
TexPrint DT-XP A4 sublimation paper/mug paper - 110 sheets
Format: A4 - 210 x 297 mm Grammage: 100 g/m 2 Number: - 110 sheets High-quality printing paper with sublimation technology. Perfect and exceptionally deep and very contrasty, it reproduces colors from the RGB palette in the sublimation process. High-quality coated paper. Important information: DO NOT USE IN RICOH PRINTERS!
€15,73
-
Theelichthouder Hart met MDF Sublimatie Hondenpoot
Deze unieke theelichthouder in hartvorm met hondenpoot is speciaal ontworpen voor sublimatie. De MDF-inleg met witte toplaag en subtiele sinaasappelstructuur kan eenvoudig gepersonaliseerd worden met een foto, tekst of ontwerp, waardoor dit product ideaal is als aandenken of bijzonder cadeau voor dierenliefhebbers. Het stevige onderplateau van 18 mm MDF en de lijst van 9 mm zwart MDF zorgen voor een moderne en stabiele uitstraling. Het product wordt compleet geleverd als losse onderdelen en kan na het bedrukken eenvoudig in elkaar gezet en verlijmd worden. Specificaties: Onderplateau: ca. 16,5 x 11 cm, 18 mm MDF Lijst: 9 mm zwart MDF Hart (buitenmaat): ca. 15 x 15,5 cm MDF sublimatie inleg: 3 mm MDF met witte toplaag (sinaasappelstructuur) Glazen theelichthouder: ca. 4,5 x 2,5 cm Sublimatie-instructies: Temperatuur: 200 °C Tijd: 65 seconden Druk: medium(afhankelijk van pers, printer en sublimatiepapier)
€6,00
-
Theelichthouder Kerst Groot – MDF 12 mm | Inclusief 2 Glazen Houders | Rendier, Ster & Kerstboom
Breng de kerstsfeer in huis met deze prachtige grote MDF theelichthouder in een sfeervol kerstontwerp met rendier, ster en kerstboom. Gemaakt van stevig 12 mm MDF, is dit decoratieve stuk perfect voor op tafel, de vensterbank of dressoir. De onderdelen worden los geleverd en dienen zelf in elkaar gelijmd te worden – een leuk en eenvoudig DIY-project waarmee je zelf een unieke sfeermaker creëert. ✨ Inclusief: 2 glazen theelichthouders⚠️ Niet geschikt voor sublimatie Afmetingen: Onderplateau: ca. 34 × 10 cm Rendier: ca. 17 × 9,5 cm Ster: ca. 10 × 9 cm Kerstboom: ca. 12 × 16 cm Voeg warmte, gezelligheid en een vleugje ambacht toe aan je interieur met deze charmante MDF kerst-theelichthouder – ideaal voor de feestdagen of als sfeervol cadeau!
€9,08
-
Theelichthouder Kerstboom van MDF – 12 mm | Inclusief Glazen Houder | DIY Houten Kerstdecoratie
Breng warmte en gezelligheid in huis met deze sfeervolle theelichthouder in de vorm van een kerstboom, gemaakt van 12 mm MDF. De natuurlijke houtkleur zorgt voor een rustieke uitstraling die prachtig past bij de kerstsfeer, maar ook het hele jaar door een stijlvolle toevoeging is aan je interieur. De onderdelen worden los geleverd en dienen zelf in elkaar gelijmd te worden – een leuk en eenvoudig DIY-project voor creatievelingen en liefhebbers van natuurlijke decoratie. ✨ Inclusief glazen theelichthouder⚠️ Niet geschikt voor sublimatie Afmetingen: Onderplateau: ca. 16,5 × 11 cm Kerstboom: ca. 16 × 12,5 cm Creëer een warme en feestelijke sfeer met deze charmante MDF kerstboom theelichthouder – perfect als decoratie, cadeau of als onderdeel van jouw kersttafel!
€4,24
-
Theelichthouder met Blanco MDF Cirkel en Lijst
Deze stijlvolle theelichthouder met ronde lijst is speciaal ontworpen voor sublimatie. De MDF-cirkel is voorzien van een witte toplaag met subtiele sinaasappelstructuur, ideaal om te personaliseren met een foto, tekst of uniek ontwerp. Het stevige onderplateau is gemaakt van 18 mm MDF en de lijst van 9 mm zwart MDF, wat zorgt voor een moderne en strakke uitstraling. Het product wordt compleet geleverd in losse onderdelen en kan na het bedrukken eenvoudig in elkaar gezet en verlijmd worden. Perfect als decoratief item, aandenken of persoonlijk cadeau. Specificaties: Onderplateau: ca. 16,5 x 11 cm, 18 mm MDF Lijst: 9 mm zwart MDF Cirkel: ca. 16,5 x 13 cm, 3 mm MDF met witte toplaag (sinaasappelstructuur) Glazen theelichthouder: ca. 4,5 x 2,5 cm Sublimatie-instructies: Temperatuur: 200 °C Tijd: 65 seconden Druk: medium(afhankelijk van pers, printer en sublimatiepapier)
€6,00
-
Theelichthouder Met MDF Sublimatie Hondenpoot
Deze bijzondere theelichthouder in de vorm van een hondenpoot is speciaal ontworpen voor sublimatie. De MDF-inleg met witte toplaag en subtiele sinaasappelstructuur is ideaal om te personaliseren met een foto, naam of ontwerp. Perfect als decoratief item, herinneringsstuk of uniek cadeau voor dierenliefhebbers. Het stevige onderplateau is gemaakt van 18 mm MDF en de lijst van 9 mm zwart MDF, wat zorgt voor een duurzame en moderne uitstraling. Het product wordt compleet geleverd als losse onderdelen en kan na het bedrukken eenvoudig in elkaar gezet en verlijmd worden. Specificaties: Onderplateau: ca. 16,5 x 11 cm, 18 mm MDF Lijst: 9 mm zwart MDF Hondenpoot: ca. 16 x 14 cm, met inleg van 3 mm MDF voorzien van witte toplaag (sinaasappelstructuur) Glazen theelichthouder: ca. 4,5 x 2,5 cm Sublimatie-instructies: Temperatuur: 200 °C Tijd: 65 seconden Druk: medium(afhankelijk van pers, printer en sublimatiepapier)
€7,99
-
Theelichthouder met MDF Sublimatie ster
Breng sfeer en persoonlijkheid in huis met deze theelichthouder in stervorm, speciaal ontworpen voor sublimatie. De MDF-inleg met witte toplaag en subtiele sinaasappelstructuur biedt de perfecte basis om te personaliseren met een foto, naam, tekst of uniek ontwerp. Het stevige onderplateau van 18 mm MDF en de lijst van 9 mm zwart MDF zorgen voor een moderne en tijdloze uitstraling. Het product wordt compleet geleverd als losse onderdelen en kan na het bedrukken eenvoudig in elkaar gezet en verlijmd worden. Ideaal als decoratief item, persoonlijk cadeau of sfeervol aandenken. Specificaties: Onderplateau: ca. 16,5 x 11 cm, 18 mm MDF Lijst: 9 mm zwart MDF Ster: ca. 14 x 13,5 cm, met inleg van 3 mm MDF voorzien van witte toplaag (sinaasappelstructuur) Glazen theelichthouder: ca. 4,5 x 2,5 cm Sublimatie-instructies: Temperatuur: 200 °C Tijd: 65 seconden Druk: medium(afhankelijk van pers, printer en sublimatiepapier)
€6,00
-
Theelichthouder met Sublimatie MDF rechthoek
Deze elegante theelichthouder met rechthoekige lijst is speciaal ontworpen voor sublimatie. De MDF-inleg is voorzien van een witte toplaag met subtiele sinaasappelstructuur, ideaal om te personaliseren met een foto, tekst of uniek ontwerp. Het onderplateau is gemaakt van 18 mm MDF en de lijst van 9 mm zwart MDF, wat zorgt voor een moderne en strakke uitstraling. Het product wordt compleet geleverd in losse onderdelen en kan na het bedrukken eenvoudig in elkaar gezet en verlijmd worden. Perfect als sfeervolle decoratie, bijzonder aandenken of persoonlijk cadeau. Specificaties: Onderplateau: ca. 16,5 x 11 cm, 18 mm MDF Lijst: 9 mm zwart MDF Rechthoek: ca. 10,5 x 15,5 cm, met inleg van 3 mm MDF voorzien van witte toplaag (sinaasappelstructuur) Glazen theelichthouder: ca. 4,5 x 2,5 cm Sublimatie-instructies: Temperatuur: 200 °C Tijd: 65 seconden Druk: medium(afhankelijk van pers, printer en sublimatiepapier)
€6,00
-
Theelichthouder met sublimatie MDF hart
Deze stijlvolle theelichthouder met hartvorm is speciaal ontworpen voor sublimatie. Het hart is voorzien van een MDF-inleg met witte toplaag en subtiele sinaasappelstructuur, ideaal om te personaliseren met een foto, tekst of uniek ontwerp. Het stevige onderplateau is gemaakt van 18 mm MDF en de lijst van 9 mm zwart MDF, wat zorgt voor een moderne en elegante uitstraling. Het product wordt compleet geleverd in losse onderdelen en kan na het bedrukken eenvoudig in elkaar gezet en verlijmd worden. Perfect als sfeervolle decoratie, bijzonder aandenken of persoonlijk cadeau. Specificaties: Onderplateau: ca. 16,5 x 11 cm, 18 mm MDF Lijst: 9 mm zwart MDF Hart: ca. 16,5 x 13 cm, met inleg van 3 mm MDF voorzien van witte toplaag (sinaasappelstructuur) Glazen theelichthouder: ca. 4,5 x 2,5 cm Sublimatie-instructies: Temperatuur: 200 °C Tijd: 65 seconden Druk: medium(afhankelijk van pers, printer en sublimatiepapier)
€6,00
-
Theelichthouder met Sublimatie MDF hexagon
Deze moderne theelichthouder met hexagonvorm is speciaal ontworpen voor sublimatie. De MDF-inleg is voorzien van een witte toplaag met subtiele sinaasappelstructuur, waardoor je eenvoudig een persoonlijke foto, tekst of creatief ontwerp kunt aanbrengen. Het stevige onderplateau is gemaakt van 18 mm MDF en de lijst van 9 mm zwart MDF, wat zorgt voor een stijlvolle en duurzame uitstraling. Het product wordt compleet geleverd in losse onderdelen en kan na het bedrukken eenvoudig in elkaar gezet en verlijmd worden. Ideaal als sfeervolle decoratie, bijzonder aandenken of origineel gepersonaliseerd cadeau. Specificaties: Onderplateau: ca. 16,5 x 11 cm, 18 mm MDF Lijst: 9 mm zwart MDF Hexagon: ca. 14 x 12,5 cm, met inleg van 3 mm MDF voorzien van witte toplaag (sinaasappelstructuur) Glazen theelichthouder: ca. 4,5 x 2,5 cm Sublimatie-instructies: Temperatuur: 200 °C Tijd: 65 seconden Druk: medium(afhankelijk van pers, printer en sublimatiepapier)
€6,00
-
Theelichthouder met Sublimatie MDF huisje
Deze sfeervolle theelichthouder met huisjesvorm is speciaal ontworpen voor sublimatie. Het MDF-inlegstuk is voorzien van een witte toplaag met subtiele sinaasappelstructuur, perfect geschikt om te personaliseren met een foto, tekst of eigen ontwerp. Het stevige onderplateau is gemaakt van 18 mm MDF en de lijst van 9 mm zwart MDF, wat zorgt voor een moderne en tijdloze uitstraling. Het product wordt compleet geleverd in losse onderdelen en kan na het bedrukken eenvoudig in elkaar gezet en verlijmd worden. Een prachtig decoratiestuk en ideaal als gepersonaliseerd cadeau of aandenken. Specificaties: Onderplateau: ca. 16,5 x 11 cm, 18 mm MDF Lijst: 9 mm zwart MDF Huisje: ca. 9,5 x 13 cm, met inleg van 3 mm MDF voorzien van witte toplaag (sinaasappelstructuur) Glazen theelichthouder: ca. 4,5 x 2,5 cm Sublimatie-instructies: Temperatuur: 200 °C Tijd: 65 seconden Druk: medium(afhankelijk van pers, printer en sublimatiepapier)
€6,00
-
Theelichthouder Rendier van MDF – 12 mm | DIY Houten Kerstdecoratie | Zonder Glazen Houder
Breng warmte en gezelligheid in huis met deze charmante theelichthouder in rendierdesign, gemaakt van stevig 12 mm MDF. De natuurlijke houtkleur zorgt voor een rustieke uitstraling die perfect past bij de winter- en kerstsfeer, maar ook het hele jaar door een stijlvolle decoratie vormt. De onderdelen worden los geleverd en dienen zelf in elkaar gelijmd te worden – een leuk en eenvoudig DIY-project voor jong en oud. ⚠️ Let op: Wordt geleverd zonder glazen theelichthouder (los bij te bestellen). Niet geschikt voor sublimatie. Afmetingen: Onderplateau: ca. 16,5 × 11 cm Rendier: ca. 17 × 9,5 cm Deze MDF rendier theelichthouder is een sfeervolle toevoeging aan je interieur – ideaal voor de feestdagen of als decoratief accent het hele jaar door!
€4,84
-
Theelichthouder Ster Groot van MDF | Inclusief Glazen Houder | Niet Geschikt voor Sublimatie
Breng sfeer en warmte in huis met deze grote theelichthouder in stervorm, gemaakt van 12 mm MDF. Dankzij het eenvoudige, natuurlijke ontwerp past deze decoratie perfect in elk interieur — van modern tot landelijk — en is hij ideaal voor de feestdagen of gewoon als stijlvolle blikvanger in huis. De onderdelen worden los geleverd en dienen zelf in elkaar gelijmd te worden. Een leuk DIY-project voor jezelf of samen met anderen! ⚠️ Let op: Niet geschikt voor sublimatie. Glazen theelichthouder is inbegrepen. Afmetingen: Onderplateau: ca. 20 × 13,5 cm Ster: ca. 19 × 18 cm Glazen houder geschikt voor een theelichtje van ca. 5,5 cm doorsnede (onderzijde) Voeg een warme, gezellige gloed toe aan je interieur met deze prachtige MDF theelichthouder in stervorm – een combinatie van eenvoud, sfeer en ambacht!
€4,96
-
Theelichthouder Ster van MDF – 12 mm | Niet Geschikt voor Sublimatie | DIY Houten Decoratie
Productomschrijving:Breng warmte en sfeer in huis met deze prachtige theelichthouder in stervorm, gemaakt van 12 mm MDF. De natuurlijke houtkleur zorgt voor een gezellige, rustieke uitstraling die perfect past bij elk interieur. De onderdelen worden los geleverd en dienen zelf in elkaar gelijmd te worden – een leuk en eenvoudig DIY-project voor jong en oud. ⚠️ Let op: Niet geschikt voor sublimatie. Glazen theelichthouder is inbegrepen. Afmetingen: Onderplateau: 16,5 × 11 cm Ster: 14,5 × 14 cm Creëer een knusse sfeer met deze stijlvolle MDF theelichthouder in stervorm – perfect als decoratie, cadeautje of gezellige toevoeging aan je interieur!
€5,99
-
Themafiguur Paard van MDF – 9mm Hout – Zelf in Elkaar te Zetten – Decoratie Paard met Hoefijzer en Hekje – DIY Houten Knutselproject
Let op geen sublimatie Breng een vleugje landelijke charme in huis met dit houten themafiguur paard van MDF (9 mm dik). Dit decoratieve knutselproject is perfect voor liefhebbers van paarden, hobbyisten en creatieve doe-het-zelvers. Het paardenfiguur, hoefijzer, hekje en onderplankje worden los geleverd, zodat je ze gemakkelijk zelf kunt monteren. Voor extra stevigheid adviseren wij een druppel houtlijm tussen de onderdelen te gebruiken. Dit themafiguur is ideaal om te beschilderen, te beitsen of te versieren — maak er jouw persoonlijke creatie van! Perfect als kinderspeelkamerdecoratie, stalversiering, of cadeau voor paardenliefhebbers.
€5,45
-
Shrink Film Clip Clamp for Sublimation
Craft Express Clip - clamp for shrink film. This allows the film to be pressed against the handle of the mug, eliminating the need to cut or cover the heat shrinkable film.
€4,24
-
Shrink Film Clip Clamp for Sublimation
Craft Express Clip - clamp for shrink film. This allows the film to be pressed against the handle of the mug, eliminating the need to cut or cover the heat shrinkable film.
€2,73
-
Wind Spinner Round Ø 20 cm for sublimation
Made of Aluminum with a durable coating. This quality ensures a perfect sublimation result. Diameter: 20 cm Thickness: 1mm Material : Aluminum Color: White Gloss Video how to print a wind spinner (maintain above temp/time) Important information: First remove the protective film from both sides. Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€1,28
-
Toilet Mat for sublimation
Toilet mat. Dimensions: 5 0 x 40 cm Material: flannel Colour: white Important information: Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€6,90
-
Toilet Seat Cover for sublimation
Toilet seat cover. Dimensions: 35 x 45 cm Material: flannel Colour: white Important information: Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€6,90
-
Transparent Photo Ornament Ball for Sublimation
Transparent photo ornament. The print is made on the metal plate that is placed in the ornament. Diameter: 4.3 cm Material: plastic Colour: Transparent Important information: First remove the protective film from the plate. Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€2,78
-
Transparent Photo Ornament Disc for Sublimation
Transparent photo ornament. The print is made on the metal plate that is placed in the ornament. Diameter: 7.5 cm Material: plastic Colour: Transparent Important information: First remove the protective film from the plate. Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€3,03
-
Transparent Photo Ornament Snowflake 10.5cm for sublimation
Transparent photo ornament. The print is made on the metal plate that is placed in the ornament. Diameter: 10.5 cm Material: plastic Colour: Transparent Important information: First remove the protective film from the plate. Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€3,03
-
Transparent Photo Ornament Snowflake 8.5cm for sublimation
Transparent photo ornament. The print is made on the metal plate that is placed in the ornament. Diameter: 8.5 cm Material: plastic Colour: Transparent Important information: First remove the protective film from the plate. Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€3,15
-
Transparent Photo Ornament Star for sublimation
Transparent photo ornament. The print is made on the metal plate that is placed in the ornament. Diameter: 9 cm Material: plastic Colour: Transparent Important information: First remove the protective film from the plate. Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€3,03
-
Transparante standaard voor borden/tegels max 18cm
Transparante kunststof opklapbare bordenstandaard voor producten met een maximale doorsnee van 18 cm.
€1,22
-
Transparante standaard voor borden/tegels max 25cm
Transparante kunststof opklapbare bordenstandaard voor producten met een maximale doorsnee van 25 cm.
€1,33
-
Truepix Sublimation Paper 238x98mm -100 sheets for sublimation
Dimensions: 238 x 98 mm Grammage: 110 g/m 2 Number: 100 sheets This high quality universal sublimation printing paper uses top quality sublimation technology (also perfect for inkjet and gel printers). With a weight of 110gsm and a smooth surface, this paper can effortlessly transfer even the smallest details during the sublimation process, including small letters. TruePix paper is renowned for its exceptional colour quality and vibrant colours, ensuring smooth tonal transitions, both on hard surfaces such as ceramics and soft materials such as textiles. The specially designed coating of the paper ensures that the ink "lies" on the surface, preventing the paper from absorbing and therefore shrinking or creasing. With its special size of 238x98mm, this paper is ideal for sublimation printing onto mugs and similar gadgets, saving time otherwise spent cutting standard A3 or A4 paper for individual projects.
€8,71
-
Garden flag (excluding holder) for sublimation
Garden flag (excluding holder). Dimensions: 28 x 46 cm Material: polyester Colour: white Important information: Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€3,87
-
Garden flag holder (flag not included) for sublimation
Garden flag holder. Dimensions: 42.5 x 79 cm Material: metal Colour: black Important information: Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€5,08
-
Teddy bear with T-shirt 25cm for sublimation
Teddy bear with t-shirt. Height: 25 cm Dimensions: 15 x 10 cm Material: 100% polyester Important information: Machine washable at 40°C. Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€8,02
-
Red Fringe Flag for Sublimation
Pennant with red tassels and a pendant, reinforcing insert on the inside. Dimensions: 15 x 20 cm Material: Satin / Polyester Weight: 200 g/m 2 Important information: Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€2,90
-
Black Fringe Flag for Sublimation
Pennant with black tassels and a pendant, reinforcing insert on the inside. Dimensions: 15 x 20 cm Material: Satin / Polyester Weight: 200 g/m 2 Important information: Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€2,90
-
170ml (6oz) Tea Light Holder Frosted for sublimation
Made of high quality frosted glass with a durable coating. This quality ensures a perfect sublimation result. Capacity: 170ml Height: 8.5 cm Diameter: 6.5 cm Color: Transparent Frosted Material: Glass Video how to print a glass mug (maintain the above temp/time) Important information: This product is dishwasher safe, but the print will remain beautiful longer if washed by hand. Only suitable for a mug press with adjustable degrees up to 165°C. Automatic mug presses that cannot be adjusted are not suitable for sublimating glass mugs. -It is known that: -The Cricut mug press eventually breaks due to overheating from the glass getting too hot. -A number of stores have withdrawn the Loklik tumbler/mug presses from sale because they do not provide the desired results. -The Vevor mug press often does not give the desired result. Sublimation advantage uses and has only experience with the Craft Express brand. The indicated time and temperature is an indication as this can vary per press For problems with other brands, please contact the relevant dealer. The blurriness of the print is not due to our mugs but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€5,76
-
Verschillende verlichte acrylplaat met handvat voor sublimatie
Acryl plaat verlicht door gekleurde LED's met handvat. De kleuren worden veranderd met een knop op het handvat: rood/groen/blauw/geel/roze/regenboog.Kies uw model uit het keuzemenu. Belangrijke informatie: Beschermfolie eerst verwijderen aan beide kanten. Sublimatievoordeel gebruikt en heeft enkel ervaring met het merk Craft Express. De aangegeven tijd en temperatuur is een indicatie daar dit kan verschillen per pers. Voor problemen met andere merken dient u contact op te nemen met desbetreffende dealer. Vaag worden of verkleuringen van de print ligt niet aan onze producten maar aan de pers. Check de pers met een infrarood-thermometer of de ingestelde graden ook juist zijn. Voor een oven doet u dit met een oven-thermometer.
€6,63
-
Square Mirror for sublimation
Silver, metal, lockable mirror. The print is made on a metal plate that is fixed to the milled place with the supplied double-sided tape. Dimensions: 6 x 6 cm Material: metal Colour: Silver Important information: First remove the protective film from the plate. Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€2,66
-
Metal Bottle Opener for Sublimation
Dimensions: 4 x 17.8 cm Thickness: 1.8 mm Material: metal Color: silver Video how to print a bottle opener (maintain above temp/time) Important information: Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€2,42
-
Felt Tree Hanger Bell for sublimation
Felt pendant. Dimensions: 9 x 9 cm Thickness: 0.3 cm Material: felt Colour: white Video how do I print felt (maintain the above temperature and time)
€0,30
-
Felt Tree Hanger Circle for sublimation
Felt pendant. Dimensions: 9 x 9 cm Thickness: 0.3 cm Material: felt Colour: white Video how do I print felt (maintain the above temperature and time)
€0,30
-
Felt Tree Pendant Heart for sublimation
Felt pendant. Dimensions: 9 x 9 cm Thickness: 0.3 cm Material: felt Colour: white Video how do I print felt (maintain the above temperature and time)
€0,30
-
Felt Tree Hanger Christmas Tree for sublimation
Felt pendant. Dimensions: 8 x 9 cm Thickness: 0.3 cm Material: felt Colour: white Video how do I print felt (maintain the above temperature and time)
€0,24
-
Felt Tree Hanger Star for sublimation
Felt pendant. Dimensions: 8 x 9 cm Thickness: 0.3 cm Material: felt Colour: white Video how do I print felt (maintain the above temperature and time)
€0,30
-
Padlock Round for sublimation
Padlock with key. The print is made on the enclosed metal plate, then attached to the lock. The padlock comes with a key hanging on a chain. Dimensions: 4 x 8 cm Colour: Silver Important information: First remove the protective film from the plate. Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€2,99
-
Flat press 40 x 50 cm Drawer + Automatic open for sublimation NOW IN STOCK
RECOMMENDED pick-up to get a complete explanation for free in Zwolle. Flat press: 40 x 50 cm Temperature range: 0-482°F / 0-250°C Power: 1600 W / 2200 W Voltage: 110 V / 220 V Electricity: 16A Time adjustment range: 1-999 sec. Weight: 42.2 kg
€448,40
-
Towel 20x20cm for sublimation
One side of the towel is made of cotton, the other side is made of polyester. Dimensions: 20 x 20 cm Material: polyester / cotton Colour: white Video how to print a towel (maintain the above temp/time) Important information: One side is Cotton, the printable side is soft Polyester. Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€3,68
-
Waffle Towel 45x71cm for sublimation
Pleasant to the touch and absorbent towel, indispensable in every bathroom and kitchen. Dimensions: 45 x 71 cm Material: polyester Color: white Video how to print a towel (maintain the above temp/time) Important information: Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€5,81
-
Waffle Kitchen towel 28x46 cm for sublimation
Towel made of water-absorbent fabric in waffle pattern. Dimensions: 28x46 cm Material: polyester Colour: white Video how to print a waffle cloth (maintain the above temp/time) Important information: Machine washable at 40°C. Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€4,05
-
Water bottle 800ml construction for sublimation
Single-walled water bottle with handle and screw-on mouthpiece. Capacity: 850 ml Dimensions: Ø 7.3 x 25 cm Material: aluminum Color: white/blue Video how to print a Bidon/water bottle (maintain the above temp/time) To prevent melting of plastic edge: Tumbler press : keep the plastic part outside the press. Oven: wrap the plastic edge with a strip of silicone mat (fold the rest inwards into the bottle), tape in place. Time: 7 minutes Temperature: 165 degrees. Then (do not hold it by the plastic edge) immediately let it cool in a bowl of cold water. Important information: This product is dishwasher safe, but the print will remain beautiful longer if washed by hand. Sublimatievoordeel uses and has experience only with the brand Craft Express. The indicated time and temperature is an indication as this can vary per press. For problems with other brands, please contact the relevant dealer. Any blurring or discolouration of the print is not due to our products but to the press. Check the press with an infrared thermometer to see if the set degrees are correct. For an oven, do this with an oven thermometer.
€6,05
You have seen 768 out of 803 products